The Mighty Mac 2 YD series 220 and 2.5 YD series 250 compactors provide high compaction forces in a shorter, space saving footprint. Up to 40% shorter than standard compactors, the 220 and 250 have more than 54,000 and 62,000 lbs. of maximum packing force respectively.
Learn More

Mighty Mac 220 Series

These heavy duty body assemblies are 50% stronger than others on the market. Solid 3/8” plate side walls are further reinforced with structural tube top rails, 1” x 3” solid horizontal bar and 3” structural channel verticals. The 8” x 6” x 3/4” breaker bar is supported by 4” x 3” x 1/4” structural steel tubing and gusseted with 1/2” thick plate. This extra rugged construction totally eliminates side wall deformation even under extreme conditions.

Mighty Mac 250 Series

Standard Features

Key-lock Start Switch Power Unit Factory Ready for 208-230-460 Volt 3 phase Solid State Motor Starter Overload
Power Unit Weather Cover Red Mushroom-head Stop Button Adjustable 9-45 Amp
Reverse Push Button Automatic Motor Starter Reset NEMA 12/13 Panel Box
The heart of the Mac 220 and 250 compactors is the hydraulic power unit. Only top of the line, off the shelf components are utilized to deliver outstanding reliability and prevent “vendor lock in” for our customers.
1­1/2" thick hook inserted through hook plate Baldor 208/230/460 volt 3 phase high efficiency
Hydraulic pump: Vickers ultra quiet vane type
Valve: Yuken softshift
Fullness signaling pressure switch: Barksdale
Hydraulic hose, connectors and fittings: Weatherhead
Push buttons and switches: General Electric
Motor starter and overload: Eaton
PLC controller: Eaton
Control transformer: Oversize, 208/230/460 volt input with low DC secondary voltage for operator controls

Specifications and Dimensions

MAC 220 MAC 250
Mfr. Rating 2 cubic yards 2.5 cubic yards
Industry Rating 1.44 cubic yards 1.83 cubic yards
Clear Top Opening 58" x 42" 58" x 54"
Hydraulic Cylinders (2) 4 ½” bore x 2 ½” rod (2) 4 ½” bore x 2 ½” rod
Ram Penetration 14" 14"
Packing Force Normal: 50,300 lbs
Maximum Pack-Out: 54,300 lbs. 		Normal: 58,300 lbs.
Maximum Pack-Out: 55,100 lbs.
Ram Face PSI Normal: 27.94 PSI
Maximum: 30.16 PSI 		Normal: 32.38 PSI
Maximum: 34.66 PSI
Hydraulic Pressure Normal: 1850 PSI
Maximum: 2000 PSI 		Normal: 2150 PSI
Maximum: 2300 PSI
Ram Face Dimensions 30" x 60" 30" x 60"
Cycle Time 51 seconds 48 seconds
Motor 10 H.P. TEFC 15 H.P. TEFC
Pump 10 GPM vane 13 GPM vane
Frame Floor 3/8” plate 3/8” plate
Frame Sides 3/8” plate 3/8” plate
Breaker Bar 8" x 6" x 3/4" angle 8" x 6" x 3/4" angle
Ram Face 1/2" plate 1/2" plate
Ram Floor 1/2" plate 1/2" plate
Ram Top 1/4" plate 1/4" plate
Ram Sides 1/4" plate 1/4" plate
Ram Guides UHMWPE UHMWPE
Dimensions MAC 220 MAC 250
A 73” 92”
B 42” 54”
C 31” 38”
D 39-9/16” 39-9/16”
E 48” 48”
Click here to download
the literature

Explore Related Products

SPECS
MORE DETAILS
SPECS
MORE DETAILS
SPECS
MORE DETAILS
SPECS
MORE DETAILS
CONTACT US
CONTACT US

Contact Us

Little Giant Apartment Compactor

Standard Features

  • Top Feed Hopper
  • Single Side Container Ratchet
  • Key-lock Start Switch
  • Container Fullness Indicator Light
  • UL Labeled Control System
  • 2 Hopper Doors with Interlock Switches
  • Red Mushroom-head Stop Button
  • Adjustable Solid State Motor Starter Overload
  • Low DC Voltage Operator Controls
  • Photo-eye Start

Mighty Mac Series

These heavy duty body assemblies are 50% stronger than others on the market. Solid 3/8” plate side walls are further reinforced with structural tube top rails, 1” x 3” solid horizontal bar and 3” structural channel verticals. The 8” x 6” x 3/4” breaker bar is supported by 4” x 3” x 1/4” structural steel tubing and gusseted with 1/2” thick plate. This extra rugged construction totally eliminates side wall deformation even under extreme conditions.
compactor-mighty-mac-220
compactor-mighty-mac-250

Standard Features

  • Key-lock Start Switch
  • Power Unit Factory Ready for 208-230-460 Volt 3 phase
  • Solid State Motor Starter Reset
  • Power Unit Weather Cover
  • Red Mushroom-head Stop Button
  • Adjustable 9-45 Amp
  • Reverse Push Button
  • Automatic Motor Starter Reset
  • NEMA 12/13 Panel Box

The heart of the Mac 220 and 250 compactors is the hydraulic power unit. Only top of the line, off the shelf components are utilized to deliver outstanding reliability and prevent “vendor lock in” for our customers.

Motor: Baldor 208/230/460 volt 3 phase high efficiency

Hydraulic pump: Vickers ultra quiet vane type

Valve: Yuken softshift

Fullness signaling pressure switch: Barksdale

Hydraulic hose, connectors and fittings: Weatherhead

Push buttons and switches: General Electric

Motor starter and overload: Eaton

PLC controller: Eaton

Control transformer: Oversize, 208/230/460 volt input with low DC secondary voltage for operator controls

Stationary Compactor

MAC Corporation’s high quality stationary compactors are designed and engineered to efficiently and economically handle maximum loads and stresses in commercial and medium industrial applications. Our compactors can be configured for your specific needs with custom fitted side or rear load hoppers, security chutes, drive on decks, loading dock enclosures and other optional equipment.

Standard Features

  • NEMA 12 Remote Control Station on 13 ft Sealtite
  • Power Unit Weather Cover
  • Power Unit Factory Ready for 208-230-460 Volt 3 phase
  • Side Mounted Power Unit
  • Red Mushroom-head Stop Button
  • Solid State Motor Starter Overload. Adjustable 9-45 Amp
  • Key-lock Start Switch
  • NEMA 12/13 Control Panel
  • Automatic Motor Starter Reset

Octagon Packer Receiver

Available for all popular hoists in 28 to 50 cubic yard capacities

Standard Features

  • 10 GA side, front, and door panels
  • 3″ 4.1 lb floor channels on 16″ avg. centers
  • Solid steel nose cones inserted into rails
  • Push plates on front verticals
  • Heavy duty bar stock hinges
  • Rust resistant primer inside and out
  • 3/16″ steel floor plate
  • 6″ x 2″ x 1/4″ wall main rails
  • Solid steel nose rollers
  • Extra heavy compactor grab plates
  • 2 coats high gloss enamel finish

Rectangular Packer Receiver

Available for all popular hoists in 28 to 50 cubic yard capacities

Standard Features

  • 10 GA side, front, and door panels
  • 3/16″ steel floor plate
  • 6″ x 2″ x 1/4″ wall main rails
  • Solid steel nose rollers
  • Extra heavy compactor grab plates
  • Rust resistant primer inside and out
  • Side and roof posts on 24″ centers
  • 3″ 4.1 lb floor channels on 16″ avg. centers
  • Solid steel nose cones inserted into rails
  • Push plates on front verticals
  • Heavy duty bar stock hinges
  • 2 coats high gloss enamel finish

Self Contained Compactor

MAC Corporation’s high quality self-contained compactors are designed for wet solid waste applications. Their leak-proof construction makes these units ideal for shopping malls, hotels, restaurants, supermarkets, food processing plants, and medical facilities. When equipped with an enclosed loading hopper these units effectively control insect and rodent problems. Our compactors can be configured for your specific needs with custom fitted side or rear load hoppers, security chutes, drive on decks, loading dock enclosures and other optional equipment.

Standard Features

  • Remote Power Unit
  • Key-lock Start Switch
  • Power Unit Factory Ready for 208-230-460 Volt 3 phase
  • Full 360 Degree Rear Door Seal
  • Power Unit Weather Cover
  • Red Mushroom-head Stop Button
  • Solid State Motor Starter Overload. Adjustable 9-45 Amp
  • Double End Pickup
  • NEMA 12/13 Control Panel
  • Reverse Push Button
  • Automatic Motor Starter Reset

Tub Style Open Top Roll Off

Our TBT-model roll off containers are designed for long lasting service in todays markets. Whether the usage is general refuse, construction, demolition, metals recycling, or special purpose MAC can provide the containers to suit your needs. The tub design offers clean dumping and economical shipping. Up to ten 20 yd containers per truckload.

Available for all popular hoists in 6 to 40 cubic yard capacities

Standard Features

  • 10 GA side, front, and door panels
  • 3/16″ steel floor plate
  • 3″ 4.1 lb floor channels on 16″ avg. centers
  • 1-1/2″ thick hook inserted through hook plate
  • Solid steel nose rollers
  • Heavy duty bar stock hinges
  • 2 coats high gloss enamel finish
  • 4″ x 4″ structural tube top rails
  • Solid steel nose cones inserted into rails
  • 6″ x 2″ x 1/4″ wall main rails
  • 3/4″ solid steel hook plate
  • Push plates on front verticals
  • Rust resistant primer inside and out

Rectangular Open Top Roll Off

Our R-model roll off containers are designed for long lasting service in todays markets. Whether the usage is general refuse, construction, demolition, metals recycling, or special purpose, MAC can provide the containers to suit your needs.

Available for all popular hoists in 6 to 60 cubic yard capacities.

Standard Features

  • 10 GA side, front, and door panels
  • 6″ x 3″ top rails
  • 3″ 4.1 lb floor channels on 16″ avg. centers
  • Solid steel nose cones inserted into rails
  • 1-1/2″ thick hook inserted through hook plate
  • Push plates on front verticals
  • Rust resistant primer inside and out
  • Side posts on 24″ centers
  • 3/16″ steel floor plate
  • 6″ x 2″ x 1/4″ wall main rails
  • 3/4″ solid steel hook plate
  • Solid steel nose rollers
  • Heavy duty bar stock hinges
  • 2 coats high gloss enamel finish